| Application: | Garden Supplies, Decoration, Electronic |
|---|---|
| Cooling Way: | Air Cooling |
| Control: | Automatic |
| Samples: |
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier 
| Input Voltage: | 110V-230V | Power: | 4000W |
|---|---|---|---|
| Maximum Output Corrent: | 100A | Protection Degree: | IP 54 |
| Dimensions Carrying Case(WxDxH): | 405*285*340mm | Weight Machine: | 16kg |
Electrical Welding HDPE PP PP - R Water Gas Fire Sprinkler Tube Machine
Electrical welding machine- ELEKTRA 315Description
ELEKTRA 315 is an universal electrofusion machine,suitable for welding pipe/fittings for the transport of gas, water and for welding fire sprinkler system (HDPE,PP,PP-R,couplings for 8 to 48 V).The Elektra 315 machine is made in compliance with international standard. Composed of:machine body and carring case,intuitive control panel an in built memory with 500 welding cycles,featuring the possiblity of transferring data to a Pc/Laptop and an laser scanner-barcode reading system that allows the automatic setting of the welding parameters.
Stand composition:
1. Universal
2. Laser scanner
3. Pen Drive
4. Manual scraper
On request:
1. Software Ritmo Transger
2. Adapter DB9M-USB
Electrical welding machine- ELEKTRA 315Technical Features
| Working range | 20-315mm |
| Power supply | 110/230V Sihgle Phase 50/60 Hz |
| Absorbed power | 4000W |
| Max.output curent | 100A |
| 60% Duty Cycle output | 60A |
| Memory capacity | 500 report |
| Protection degree | IP 54 |
| Weight machine body | ~16 kg (35.5lb) |
| Dimensions machine body | 263×240×300mm;10.3"×9.4"×1.8" |
| Dimensions transport case | 405×285×340mm; 16"×11.2"×13.4" |
Electrical welding machine- ELEKTRA 315 Packing
Normal export packing:Inner packing is aluminum case, outside is carton
Dimensions:40.5×28.5×34mm
N.W:16kg
G.W:20kg
Electrical welding machine- ELEKTRA 315Applications
Before performing fusions and before connecting to power outlet, check the following:
NOMINAL TENSION AND FREQUENCY : see technical features (page 7)
OUTLETS AND EXTENTION CABLES: they must be suitable for the power absorbed by machine ( see page 7, 10)
CABLES: isolation has to be intact, they have to be placed away from places where vehicles transit and where they can be damaged .
MACHINE BODY: it has to be isolated and placed steadily.
Keep machine and cables clean and dry. Before cleaning operations disconnect machine from power supply. Use a humid soft cloth with water and alcohol (avoid any kind of solvent).
ELEKTRA is an electronic equipment therefore it has to be handled safely avoiding impacts and sudden temperature changes.
To guarantee correct functioning for as long as possible, operators has to perform frequent checks to the following components :
In case of any anomaly machine has to be checked by manufacturer or by an authorized service centre.
In any case machine has to be serviced every 2 years by manufacturer or by an authorized service centre.
Before performing fusions and before connecting to power outlet, check the following:
NOMINAL TENSION AND FREQUENCY : see technical features (page 7)
OUTLETS AND EXTENTION CABLES: they must be suitable for the power absorbed by machine ( see page 7, 10)
CABLES: isolation has to be intact, they have to be placed away from places where vehicles transit and where they can be damaged .
MACHINE BODY: it has to be isolated and placed steadily.
Keep machine and cables clean and dry. Before cleaning operations disconnect machine from power supply. Use a humid soft cloth with water and alcohol (avoid any kind of solvent).
ELEKTRA is an electronic equipment therefore it has to be handled safely avoiding impacts and sudden temperature changes.
To guarantee correct functioning for as long as possible, operators has to perform frequent checks to the following components :
In case of any anomaly machine has to be checked by manufacturer or by an authorized service centre.
In any case machine has to be serviced every 2 years by manufacturer or by an authorized service centre.
CHUANGRONG is a leading professional supplier of plastic pipe system products since 2005.We have exported our products more than 50 countries and area.
Our products:
1.Plastic pipe
2.HDPE fittings
3.PPR fittings
4.PP compression fittings
5.pipe welding machine and tools
6.pipe repair clamp
Our aim is to provide customer with the best solutions of plastic pipe connection.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}